1/14/2024 0 Comments Intel 8 seriesc220 chipset driversReboot and be lucky, if everything should work fine.Enter the BIOS immediately while rebooting and set the Intel SATA Controller to "AHCI".Intel® H81 Chipset - Download supporting resources inclusive drivers, software, bios, and firmware updates. Ignore all warnings you will get and let the driver be installed. Intel® USB 3.0 eXtensible Host Controller Driver for Intel® 8/9/100 Series and Intel® C220/C610 Chipset Family. A SMBus controller is integrated into most Intel chipsets. SMBus is the System Management Bus used in personal computers and servers for low-speed, system management communications. Hit the "Have Disk" button, navigate to the folder with the modded 32bit Intel RST driver v11., hit the file named iaAHCI.inf and choose the Intel SATA AHCI Controller, which will match your system after the later switch to AHCI mode. Download and run the Intel Chipset Software Installation Utility so Windows properly recognizes the SMBus controller.Right click onto the related Controller and choose the options "Update Driver Software.Boot into XP in IDE mode, run the Device Manager, expand the "IDE ATA/ATAPI Controllers" section and find out the Intel SATA Controller, where your system drive is connected.Do a backup of your most important data (for the emergency case of a SATA mode switch failure).If you want to do it nevertheless and are sure regarding the DeviceID of your on-board Intel SATA Controller after the switch to "AHCI", you can try the following: That is why I do not really recommend to do it. The switch of the SATA mode from within a running OS is always risky and may end with an unbootable OS. Is there a way to switch to AHCI without installing from scratch? You can find such driver within the start post of >this< thread. Update drivers using the largest database. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |